Come Sail Away!!

Sharing some tags I made with an absolutely ADORABLE kit from Designs by Tishia! The kit is called "Sail Away" (I used the tagger size kit - it is also available in full size) and can be found HERE in the Scrappin Bratz store. I had a lot of fun with this kit and look forward to using it again!

Here are the tags I made for Tishia:





Thanks to Tishia for allowing me to use her wonderful, creative kit!!

If you like what you see, head on over to the store and grab it. Tishia also has a lot of other wonderful creations to choose from.

Shamrock Pixie Tutorial

Shamrock Pixie Tutorial

This is the tag we will be making




Moderate level - Some knowledge of PSP is needed.


Materials Needed

Paint Shop Pro (used Version 9, but can be done on any version)
PTU kit "Shamrock Pixie" by Darkmoon's Dream Designs which can be bought at Scrappin Bratz
Poser used from the kit

Kirsty's Scraps Mask #24

Filters Needed

Xero-Porcelain - FTU filter
Blinds (comes with PSP),

Optional Filter

Eye Candy 5 Impact Gradient Glow


Fonts used
FFF Fuego (for copyright info)
Doodle Journal - PTU font (for name/text)


Please note that I will give the drop shadow settings that I have used HOWEVER feel free to use your own settings if you would like.



1. Open PSP. Open New File: 600 pixels x 600 pixels, 72.000 pixels/inch resolution, transparent. At this time, also open your mask and minimize in PSP.

2. Open one of the frames in the kit (I used Frame04). Copy and paste as new layer on your blank "new file" then resize it 80% (be sure "all layers" is UNchecked). Copy and paste Paper14 as new layer then resize it 70% (be sure "all layers" is UNchecked). Move to just below your frame layer. Click inside the frame making sure that the entire area inside is clicked, then close off the frame layer, then make the paper layer active. Go to Selections - Select All, Selections - Float, Selections - Defloat. The go to Selections - Modify - Expand - by 10 pixels - then click OK. Go to Selections - Invert and then click your Delete key. Selections - Select None and then click on the frame layer, making it visible again. Go to Selections - Select All, Selections - Float, Selections - Defloat then apply your Xero/Porcelain effect using the following settings:



Go to Selections - Select None (to remove marching ants).

3. Copy and paste Paper14 as new layer then resize it 75% (be sure "all layers" is UNchecked). Move to just below your frame background layer. Go to Layers - New Mask Layer - From Image and apply these settings:



Go to the layer palette - right click on the "Group - Raster 2" layer, Merge - Merge Group. Feel free to close the mask that you have minimized.

4. Copy and paste one of the pixies (I used Pixie01) as new layer then resize it 35% (be sure "all layers" is UNchecked). Move to top in the layer palette. Move to left side of tag (see my tag for idea).

5. Copy and paste the mushroom as new layer then resize it 25% (be sure "all layers" is UNchecked). Move to just below the pixie layer. Duplicate then resize the duplicate by 75% (be sure "all layers" is UNchecked), then place them as shown on tag. Do the same thing with one of the chests (I used Chest02) - resize to 35% instead, and do not duplicate - and move that to the layer between the pixie and the mushroom.

6. Copy and paste one of the swirls (I used Swirl01) as new layer then resize it 60% (be sure "all layers" is UNchecked). Move it to layer just under the mushroom, then place it behind his head (as shown on tag). Duplicate swirl, then go to Image - Flip, then Image - Mirror. Move the swirl around til it is placed somewhat on the right bottom of the frame (see my tag for idea). If desired, resize the bottom swirl by 85% - some of it still might run off the area, that is ok. Use Eye Candy 5 Impact, Gradient Glow and these settings:



7. Copy and paste Splatter01 as new layer then resize it 60% (be sure "all layers" is UNchecked). Move to just below your frame layer, then move it around so it is somewhat centered under the frame. Go to Effects - Texture Effects - Blinds and use the following settings:

width: 5
opacity: 25
color: black
horizontal: unchecked
light from left/top: unchecked

Then go to Adjust - Brightness and Contrast - Brightness/Contrast and use these settings:

brightness: 15
contrast: 0

Go to Eye Candy Impact, Gradient Glow and use the previous settings.

8. Copy and paste Shamrocks01 as new layer then resize it 50% (be sure "all layers" is UNchecked) then go to Image - Rotate - Free Rotate using these settings:

Direction: right
Degrees: 90
All Layers: unchecked
Rotate Single layer around canvas center: unchecked

Center it (somewhat) within the frame, as seen on my tag. Sharpen, if needed.

9. Copy and paste Grass03 as new layer then resize it 40% (be sure "all layers" is UNchecked), then place it just above the mushroom layer.

10. Copy and paste Flower07 as new layer then resize it 35% (be sure "all layers" is UNchecked), then place it just above the top swirl layer, as seen on the tag.

11. Apply drop shadow to all layers (except mask layer and pixie layer) with these settings - or your preferred settings:

vertical: 2
horizontal: 0
opacity: 75
blur: 7.00
color: black
shadow on new layer: unchecked

(note: on frame layer, I applied the drop shadow twice)


On the pixie layer, use the following settings:

vertical: 0
horizontal: 0
opacity: 70
blur: 20.00
color: black
shadow on new layer: unchecked

(note: I didn't apply a drop shadow on the mask layer, however you may if you prefer.)

12. At this point, feel free to decorate further, using elements in the kit. When you have it all decorated, go to you layer palette, right click, then Merge - Merge Visible all the layers. Then resize to 450 pixels x 450 pixels - all layers checked. Go to Adjust - Sharpen. (You might need to do this more than once.)

13. Apply copyright information and tagger watermark. (I used Pixelette for mine.)

14. Merge Visible, save in .png format (to retain background transparency).

15. Apply name and place in center of bottom of frame area (see my tag for idea). For mine I used the font Doodle Journal, with #33582a as my foreground and background colors. I did stroke 3.0 and size 48 on the font, and used the following Eye Candy 5 Impact - Gradient Glow settings:




and then did the following drop shadow settings:

Vertical: 2
Horizontal: 0
Opacity: 75
Blur: 8.00
Color: Black
Shadow on New Layer: Not checked

And that's it!!

Thank you so much for checking out my tutorial and I would love to see your results!



*~*~*~*~*~*~*~*~*~*~*~*

Check out this wonderful result from Lorri, a fellow member on the Shewolf's Domain groups:



Absolutely amazing! Thank you Lorri, for sharing your result!!

Swan's Flight

Just wanted to share 2 new tags with you that I made using the beautiful kit by Darkmoon's Dream called Swan's Flight :





If you like what you see, be sure to stop by the store Scrappin' Bratz and check it out!

Atomic Bop Tutorial

Atomic Bop Tutorial

This is the tag we will be making:




Moderate level - Some knowledge of PSP is needed.


Materials Needed

Paint Shop Pro (used Version 9, but can be done on any version)
PTU kit "Atomic Bop" by Immortal Dreams which can be bought at Scrappin Bratz
Poser from Lisa at Sophisticated Scraps
Chelle/WeeScotsLass Mask #127
Tag Template #34 from Kristin at Toxic Desirez
Gradients teom_085 and teom_130 (provided HERE)
Filters Needed: Eye Candy 4000 Glass and Eye Candy 5 Impact Gradient Glow
Fonts used: copy 10_56 (for copyright info), Tattoo Ink (for name/text)


1. Open PSP. Open tag template, click on Shift +D to duplicate, then close original. Delete the crediting layer. At this time, also open your mask and minimize in PSP.
3. Go to AB-Paper 10 from the kit - Copy, then go to the template and Paste as New Layer right above the Bars layer. Rename it Paper 10. Resize (Image - Resize) 65%, All Layers UNchecked.
3. Make Bars layer active then go to Selections - Select All.... Selections - Float .... Selections - Defloat. You will now have marching ants around the bars. Make the Paper 17 layer active by clicking on it.
4. Selections - Invert. Click on the Delete Button. Paper 10 should now be where the bars now are/were. Go to Selections - Invert. Now the inside of the bars is active again.
5. Apply the following drop shadow:

Vertical and Horizontal: 0
Opacity: 75
Blur: 12.00
Color: black
Shadow on new layer: unchecked

Go to Selections - Select None. Delete the bars layer.

6. Go to AB-Paper 15 from the kit - Copy, then go to the template and Paste as New Layer right above the Circle layer. Rename it AB-Paper 15. Resize (Image - Resize) 65%, All Layers UNchecked.
7. Make Circle layer active then go to Selections - Select All.... Selections - Float .... Selections - Defloat. You will now have marching ants around the circle. Make the Paper 15 layer active by clicking on it.
8. Selections - Invert. Click on the Delete Button. Paper 15 should now be where the bars now are/were. Go to Selections - Invert. Now the inside of the circle is active again.
9. Apply the following drop shadow:

Vertical and Horizontal: 0
Opacity: 75
Blur: 12.00
Color: black
Shadow on new layer: unchecked

Go to Selections - Select None. Delete the circle layer.

10. Click on the crop tool and go to Merged Opaque. Move the cropping window around so you crop away the drop shadowing along the outer edges of the template. Click the check mark to crop.

11. Make Notes layer active then go to Selections - Select All.... Selections - Float .... Selections - Defloat. You will now have marching ants around the notes. Add new raster layer right above the notes layer, then flood fill with the gradient teom_085. (In the gradient palette, use these settings: Angle 45, repeats 6, radial).
12. Using Eye Candy 4000, Glass, apply these settings:

Use the following drop shadow:


Vertical and Horizontal: 0
Opacity: 75
Blur: 8.00
Color: black
Shadow on new layer: unchecked

13. Do the same thing with the stars, using gradient teom_130. (The only change is, when using the Eye Candy 4000 filter, change the bevel profile to button.)
14. Click on the background layer. Take a paper of your choice (I used AB-Paper 12) and copy and paste as new layer just above the background layer. Resize (Image - Resize) 70%, All Layers UNchecked. Go to Layers - New Mask Layer - From Image and use these settings:



11. Go to Layer Palette, click on the Group - Raster 3. "Right click", go to Merge - Merge Group. Resize (Image - Resize) 110%, All Layers UNchecked. Apply drop shadow used on papers layer.
12. Copy and paste poser from kit - place it in the center of the tag. Resize (Image - Resize) 70%, All Layers UNchecked. Line up her legs along the lower areas of the bars. (see my tag for idea) Move the poser layer to just under the Words layer.
13. Do with the words layer the same steps you took for the stars. (You might need to zoom in to flood fill the letters. If you do, remember to zoom back to 100% when you are done.) When done, go to Eye Candy 5 Impact, Gradient Glow and apply the following settings:



Apply the following drop shadow:

Vertical and Horizontal: 1
Opacity: 75
Blur: 5.00
Color: black
Shadow on new layer: unchecked

14. At this point, apply elements as desired. (You may need to move your poser around - do so as needed/desired.)
15. Apply © information, scrap designer, tagger watermark on new layer. When happy with the look, merge visible.
16. Apply name/text to tag.

And you are done!

Thank you so much for checking out my tutorial and I would love to see your results if you try it!

Popeye Love Tutorial

Hello and welcome! This is the tag we will be making today:

 

 

 

Now, it can be made either animated or non-animated. The animated directions are towards the bottom, after the **.

 

Moderate level - Some knowledge of PSP is needed.

 

 

Materials Needed

Paint Shop Pro & Animation Shop (used PSP9 and AS3, but can be done on any version)
PTU kit called Game of Love by Staceys Designs which can be bought at Katelynn's Designs
Tubes by Popeye Wong which are Free To Use and can be found here (thanks Popeye!)
Mask - OvalSlatsMask.jpg – HERE

 

 

Filters Needed:

Xenofex 2 – Constellation

Filters Unlimited 2 (Paper Textures)

Fonts used:

FFF Professional (for copyright info)

Doodle Journal (for name/text)

 

 

 

DIRECTIONS

 

 

1. Open PSP. Open New File, 600 pixels x 600 pixels, 72.000 resolution, transparent. (Don't worry if it looks too big now, we can crop it down later.) Also open your mask and minimize it in PSP.

2. Copy and paste the triple circle frame, do your best to center it. Feel free to close out the original.


3. Taking your preset shape tool, choose the ellipse (not the circle, but the oval), foreground and background medium gray, line width 2.0, draw an oval over one of the circles in the frame, like this:

Be sure that the edges of the gray ellipse/oval shape is wider than the inner space of the frame area. Once you have it how you want it, convert layer to raster. Duplicate it twice, then move them so you have an oval under each of the oval areas of the frame. We will be using these gray ovals as a template of sorts for the background and the pictures/tubes. Close all layers except the ones with the gray ovals, then merge visible, then move them under the frame layer. You can now unhide the other layers.

4. Copy and paste one of the papers from the kit (I am using Paper1). Feel Free to resize the paper (be sure 'all layers' is UNchecked ... I resized mine to 500 pixels x 500 pixels). Make the 3 oval layer active, then go to Selections - Select All.... Selections - Float.....Selections - Defloat. Go back to the paper layer, make active, then go to Selections - Invert, then click on the Delete key. You should now have the papers in the same area as the gray ovals. Move the paper layer below the frame layer but above the gray ovals layer.


5. Now, with the marching ants still active, copy and paste your tubes that you will be putting in the frames. When you are happy with how they are, just simply click the Delete key (since you have already Inverted the selection, it is set to delete everything outside of the frame area). Make sure that the image/tube layers are between the frame layer and the paper layer. Go to Selections - Select None.


6. Now, we have 2 frame areas that have doodles over them so we need to do something about it. Duplicate the images that are in that area, then move them above the frame layer. Take your eraser brush and use the following settings:

Shape: circle
Size: 25
Hardness: 100
Step: 25
Density: 100
Thickness: 100
Rotation: 0
Opacity: 100

You are going to delete the bottom area of the tubes that overlap the frame area, like this (feel free to zoom in on the area to help you see better):

7. Feel free to add drop shadows to your tubes (bottom images ONLY - don't add a drop shadow to the top ones that you erased), and feel free to add your favorite drop shadow on the frame.

8. Go to the paper layer and make active. Go to Filters Unlimited, then Paper Textures, and choose the Filter Paper option and use the following settings:

then click Apply. This will give some texture and definition to your frame's background. Don't worry about the outer edge that you might see - it will be gone when we crop down our final tag.
Close out the gray oval layer and the bottom layer (which should be blank) and Merge Visible everything else.

9. Move the frame up a little from the center. Take another paper and copy and paste it to the tag (I used Paper7), moving it below the frame. Resize it 600 pixels x 600 pixels (all layers UNchecked). Go to Layers - New Mask Layer - From Image and use these settings:

Merge Group. (Be sure you only merge the mask group - do not include the frame layer in this merge.) Move the frame and/or mask layer, if needed, so that the frame is centered on the oval slats. Unhide the very bottom layer and flood fill it with a complementing color from either one of your images/tubes or the kit (I am using color #ca7e9e).

10. Take the winged heart element and copy and paste it to your tag. Bring it to the top, and resize it by 75% (all layers UNchecked) and place it under the frame, centered. Apply your favorite drop shadow to it. Take the Forget Me Nots element, resize it by 75% (again, all layers UNchecked), and move it over to behind the left side picture in the frame (see my tag for idea). Duplicate flowers, then Mirror. Erase whatever is hanging over the bottom of the frame areas. Take your selection tool and choose the upper area of both of the flower layers. Go to Edit - Copy, Edit - Paste as New Layer. (You will need to do this twice - once for each flower layer.) If needed, place them directly over their corresponding flowers. (They may copy and paste right in the same area, in which case no moving is needed.) Move both of these above the frame layer, then erase all the parts that hang over the framed images. Apply your favorite drop shadow to the bottom flower layers (not the top ones that you erased).

11. Copy and paste the decorated flower, resize by 40% (all layers UNchecked). Sharpen, if necessary. Place it below the left frame oval area and bring to top. Apply the following drop shadow:

Vertical: 0
Horizontal: 0
Opacity: 75
Blur: 15.00
Color: black
Shadow on New Layer: not checked

Duplicate, then mirror. Delete the gray ovals layer. Crop your tag, like this:

then (if you wish to make this non-animated) Merge Visible. (If you wish to make this animated, do NOT merge visible.... go to directions, below, starting at the **.) Resize so that it is about 500 pixels wide. Apply copyright information and name/text, as shown in my tag at the top.

And you are done!

**To make tag animated**

1. If you wish to animate your tag like I have in my tag, first, close out the bottom layer and the slat/mask layer. Merge Visible all the other layers. Now unhide the bottom layer and slat/mask layer. Go to the mask layer (with the slats) and make active, then duplicate it twice (so you should have 3 layers of it). Make the top slat/mask layer active (will most likely be one of the copied layers). Go to Xenofex 2 - Constellation and use the following settings:

2. Then go to the middle mask layer, make active, then go to the Constellation filter again, this time hitting the "Random Seed" button twice, then "ok". Do the same thing to the bottom mask layer.

3. On a new raster layer, apply your copyright information, bring to top.


4. Ok, now - here comes the fun part. Close out the bottom 2 mask layers so that only the top one is showing. Go to Edit - Copy Merged ... Edit - Paste as New Image. Now, close out the top mask layer, and unhide the middle mask layer. Go to Edit - Copy Merged. Then go over to your other image and make it active (click on it) and go to Edit - Paste as New Layer. Now, go back to what you were working on, close out the middle mask layer and unhide the bottom one. Do the same thing that you did with the middle mask layer: Copy Merged, then go to the other image (which now has 2 layers) and click on it, then go to Edit - Paste as New Layer. You should now have 3 layers. This will be what you bring over to Animation Shop. Save as follows:

Now, in Animation Shop, go to File - Animation Wizard and choose the following when they come up:

*Same Size as the first image frame (next)
*transparent (next)
*Upper left corner of the frame, With the canvas color (next)
*Yes, repeat the animation indefinitely, 30 (next)

Click on "Add Image" and browse to where you saved your .psp file (be sure that "File Type" is for Paint Shop Pro Image). When you have it, click Next, then Finish. It will now open up your tag, in frames.
To check the speed of your animation, go to View - Animation. (Just click on the "X" in the upper right to stop the animation.) To Save this as a blank, go to File - Save As and save it in .gif format.

To add a name, go back to PSP and, on the top layer, apply text, and add any kind of effects you would like. When you have your name the way you like it, go to File - Copy. Then go back to Animation Shop and go to File - Paste as new animation. You are going to need 3 frames to match up the 3 frames of your animation. So go to Edit - Copy then Go to Edit - Paste After Current Frame (do this twice - to give you 3 frames of the name). Go to your tag, then go to Edit - Select All.... Edit Copy.... Edit - Paste as New Animation. Go to your names and go to Edit - Select All .... Edit Copy. Then go to your tag and go Edit - Select All, Edit - Paste Into Selected Frame. You will notice that you are able to move it around... do so until it is where you like it, then left click on your mouse - this will place it where you want it, in ALL the frames. When satisfied, save it as a .gif.

And you are done!!

I would love to see what you make if you try this tutorial!!

Thanks for looking!

Rac Amor Tutorial

I have a new tutorial for you all!! This is the tag we will be making:

Moderate level - Some knowledge of PSP is needed.

 

Materials Needed

Paint Shop Pro (used Version 9, but can be done on any version) 

PTU kit called Mi Amor by BlackWidowCreations which can be bought at Scrappin' With Friends Tag Template #9 from Purple Dragonfly Creations 

Tube by Ismael Rac (Fantasy Girl) which is available through AMI, and must have a license to use  

Vix Mask Valentine 13 

 

Filters Needed: Eye Candy 5 Impact - Gradient Glow, Tramages - Tow the Line, Filters Unlimited 2 (Paper Textures and Buttons & Frames) 

 

Fonts used:  

Pixelette (for copyright info)

ObetteScriptSSK

 

 

DIRECTIONS

1. Open PSP

2. Copy Template then click on Shift + D to duplicate entire template. Close original template.

3. Open mask in PSP then minimize. We will be using it in a little bit. 

4. Open Paper20 and copy and paste on to your template. Make the circle background layer active. Go to Selections - Select All... Selections - Float then Selections - Defloat. Click on the paper layer, then go to Selections - Invert then click on your delete button. Go to Selections - Select None. 

5. Close out the Paper20 layer and make the circle background layer active again. Click on the outer black edge with your magic wand, then go to Adjust - Color Balance - Manual Color Correction and choose a color (dark) from the tube you are using. With the edge still selected, apply the following drop shadow:

Vertical: 0 

Horizontal: 0 

Opacity: 75 

Blur: 8.00 

color: Black 

Shadow on New Layer: unchecked 

 

Go to Selections - Select None. 

 

6. Go back to the Paper20 layer, make active, then right click on it and go to Properties. Choose Overlay, Opacity 80 (everything else leave it as it is), then click OK.

7. Go to Love WordArt layer, make active. Go to Adjust - Color Balance - Manual Color Correction and change the color from black to white. Click OK. 

8. Close out all the layers except the 4 rectangle layers. Merge Visible. Keeping that layer active, go to Selections - Select All... Selections - Float then Selections - Defloat. Copy and paste Paper11 on to the template, then make that layer active, then go to Selections - Invert then click on your delete button. Go to Eye Candy 5 Impact, Gradient Glow and use the following settings (note, the color I used is the same color I used for the outer edge of the circle background, earlier):

 

 

 

Go to Selections - Select None, then apply the following drop shadow:

Vertical: 0 

Horizontal: 0 

Opacity: 60 

Blur: 15.00 

color: Black 

Shadow on New Layer: unchecked 

 

Delete the 4 rectangles layer, then unhide the largest heart layer. 

 

9. Click on the black egding of the largest heart layer and do to it what you did with the circle background, choosing a complementing color from your tube. Go to Selections - Select None. Using your magic wand, click on the inner part of the heart. Click delete (to remove the gray part of the heart). Go to Selections - Modify - Expand ... by 3 pixels, then click OK. Choose a paper (I am using Paper18) and copy and paste it on to the template. Go to Selections - Invert then click on your delete button. Move to just below your heart 'frame' that you have made. Keeping that background active and the marching ants on, copy and paste your tube to the template. Place it where you wish, then click delete (to remove the part of the tube outside of the area). Go to Selections - Select None to remove the marching ants. Apply your favorite drop shadow to the tube. Go back to the 'frame', apply the Tramages filter - Tow the Line with the default settings, then apply the following drop shadow settings:

Vertical: 0 

Horizontal: 0 

Opacity: 75 

Blur: 8.00 

color: Black 

Shadow on New Layer: unchecked 

 

With only those 3 layers open (all others hidden), go to Merge - Merge Visible. 

 

Do the same thing with the other 2 hearts, keeping in mind that you can slightly alter the color for the heart 'frame' area to give it a different look. Feel free to also use different papers for the background and to mess around with the settings in Tramages. 

 

Apply the following drop shadow on each finished heart:

Vertical: 0 

Horizontal: 0 

Opacity: 75 

 Blur: 15.00 c

olor: Black 

Shadow on New Layer: unchecked 

 

10. Move the hearts around so they are to your liking. I just moved them out a little to the outer edges. Then I used on of the close up images of the tube and copied and pasted it to the top of my template, then resized it by 85%. I moved her so that she was slightly off to the left. I applied the same drop shadow that I did to the smaller tube images. 

 

11. Clicking on the very bottom layer, copy and paste Paper23 on to the template. Bring to bottom, then apply the mask to that layer by going to Layers - New Mask Layer - From Image and use these settings: 

Merge group. Apply a slight drop shadow to the mask.

Go back to the very bottom layer and flood fill with a very pale color from your tube. Go back to mask layer, and merge down. Go to Filters Unlimited 2 and go to Paper Textures, Canvas-Coarse and use these settings:

Intensity: 29 

Lightness: 82 

 

Click Apply. Then go in to Filters Unlimited 2 again, and go to Buttons and Frames, Glass Frame 2 and use these settings:

Frame size: 15 

Contrast: 103 

 

Click Apply. 

 

12. Copy and paste Frame3 on to your template. Move it to under your 3 heart frames, then apply your favorite drop shadow. 13. Use additional elements to decorate your tag. 14. When you are happy with your tag, merge visible, then resize it to 500 pixels x 401 pixels (be sure all layers is checked). Sharpen if needed. 15. Be sure to include copyright information on your tag. 

 

For the name, I used color #4c1212 for both foreground and background, width 2.0, size 48, then applied Gradient Glow settings:

and the following drop shadow: 

 

Vertical: 1 

Horizontal: 1 

Opacity: 65 

Blur: 4.00 

color: Black 

Shadow on New Layer: unchecked 

 

And you're all done! Would love to see what you come up with!!

Cutie Bug Tutorial

Cutie Bug Tutorial This is the tag we will be making:      Moderate level - Some knowledge of PSP is needed.  Materials Needed: 
Paint Shop Pro (used Version 9, but can be done on any version) PTU kit "Cutie Bug" by Darkmoon's Dream Designs which can be bought at Scrappin Bratz Posers used from the kit  Chelle/WeeScotsLass Mask #223  Filters Needed: Mosaic-Glass (comes with PSP) Mosaic-Antique (comes with PSP)  Optional Filter:  
Eye Candy 5 Impact Gradient Glow   Fonts used: Pixelette (for copyright info) Walrus Gumbo (for name/text)   DIRECTIONS
  1. Open PSP. Open New File: 600 pixels x 600 pixels, 72.000 pixels/inch resolution, transparent. At this time, also open your mask and minimize in PSP. 2. Open Paper10, copy and paste as new layer onto 'new file'. Resize by 75%, all layers UNchecked. Go to Layers - New Mask Layer - From Image and apply these settings:    Go to the layer palette - right click on the "Group - Raster 2" layer, Merge - Merge Group. Feel free to close the mask that you have minimized. 2. Go to Effects - Texture Effects - Mosaic-Glass and apply these settings:   3. Go to Effects - Texture Effects - Mosaic-Antique and apply these settings:    4. Select one of the round frames (I am using frame 01). Copy and paste as new image. Close original. Resize frame by 65% (all layers checked). Copy and paste as new layer on to your 'tag'. Move to the top if it isn't already there. Duplicate the frame, then resize by 90% (all layers UNchecked). Apply the following drop shadow to both frames:    5. Close out the "Group - Raster 2" layer, then make the layer with the smaller frame active. Using your magic wand tool, click inside the frame area. Go to Selections - Modify - Expand - by 20 pixels, then click "ok". Copy paper 17, then paste as new layer. Resize by 75% (all layers UNchecked). Go to Selections - Invert. Click on your "delete" key. Move to just under the larger frame. Go to Adjust - Brightness and Contrast - Brightness/Contrast and apply these settings: Brightness: 90 Contrast: -25 Lower the layer opacity to 20.  6. Copy and paste (as new layer) Cutie Bug 01, then resize by 50% (all layers UNchecked), then again by 75% (all layers UNchecked). Center face in middle of frames. Click on your "delete" button. Go to the layer palette, right click on the layer with the face, and apply the following settings:    Go to Selections - Select None (to shut off the marching ants). Open your 2nd poser (I am using Cutie Bug 04). Copy and paste as new layer - resize as needed. Place above (on top) of the frame layers. Move it around, place as desired, then apply the following drop shadow settings: Vertical: 0 Horizontal: 0 Opacity: 75 Blur: 20.00 Color: Black Shadow on New Layer: Not checked then apply the drop shadow again.  7. Close out all the layers EXCEPT the frame layers. Click on the outside of the largest frame, then go to Selections - Modify - Expand - by 18 pixels - click OK. The copy and paste as new layer one of the banner/wordart elements (I am using WA 01). Resize by 60% (all layers UNchecked), place as you see on the tag. Click on your "delete" key. Go to Selections - Select None. Apply drop shadow settings you used in step #6. Unhide all the closed layers.  8. Copy String 04 and paste as new layer. Resize by 45% (all layers UNchecked). Move it under your top poser AND the banner/wordart layer (see my tag for idea). With your eraser tool, delete the little bit of string that shows just beyond the frame in the bottom left area and the area inside the frame (see my tag for idea). Be careful NOT to erase any of the leaves, though! (You may need to zoom in and out to do this - I did.) Apply the following drop shadow settings: Vertical: 1 Horizontal: 1 Opacity: 75 Blur: 10.00 Color: Black Shadow on New Layer: Not checked  9. Copy Bow 14, then resize by 45% (all layers UNchecked), then resize it again by 45%. Place it to the right of the banner. Apply drop shadow used in #8. Duplicate, then mirror. Move top tube to top layer (so that bow will end up being behind her).  10. At this point, feel free to decorate further, using elements in the kit. When you have it all decorated, close out the bottom layer and the "Group - Raster 2" layer, then Merge - Merge Visible all the other layers. Then resize by 85% (all layers UNchecked), then unhide the 2 closed off layers. Merge - Merge Visible (all 3 layers). Resize: 475 pixels x 475 pixels - all layers checked. Go to Adjust - Sharpen - Sharpen.  11. Apply copyright information and tagger watermark. (I used Pixelette for mine.)  12. Merge Visible, save in .png format (to retain background transparency).  13. Apply name and place under the main poser. For mine I used the font Walrus Gumbo, with black as my foreground color and #b31317 as my background color. I did stroke 2.0 and size 42 on the font, and used the following Eye Candy 5 Impact - Gradient Glow settings:    and then did the following drop shadow settings:  Vertical: 1 Horizontal: 0 Opacity: 75 Blur: 5.00 Color: Black Shadow on New Layer: Not checked  And that's it!! Thank you so much for checking out my tutorial and I would love to see your results!!